EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a very successful photo voltaic controller suitable for off-grid photo voltaic units. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Solar Cost Controller know-how for outstanding photo voltaic Vitality harvesting. Vital functions include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
State-of-the-art MPPT Algorithm with >ninety nine% effectiveness.
Dual-Stage Charging for Improved battery existence.
LCD Show with actual-time info monitoring.
Several Load Management Modes like guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Step Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Make certain all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and person guide.
Validate the product number and voltage rankings match your photo voltaic panel and battery specifications.
two. Mounting the Demand Controller
Choose a properly-ventilated, dry locale near to the battery financial institution.
Protected the Tracer AN controller using the furnished mounting brackets.
Retain right clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Always observe correct security protocols and ensure the procedure is run off ahead of connecting factors.
Step 1: Join visit here the battery terminals to your cost controller (good to favourable, detrimental to damaging).
Stage two: Hook up the solar panel array to your PV enter terminals.
Phase 3: Connect the load terminals if employing a direct load link.
Action four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Power about the controller by connecting the battery to start with.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Handbook, timer, gentle Manage.
five. Monitoring and Data Logging
The Tracer AN Collection supports genuine-time checking using the MT50 distant meter.
Knowledge may be logged by using the RS485 conversation port using program for instance Solar Station Computer system.
Distant checking is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Situation one: No Electricity Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Confirm the photo voltaic array’s voltage ranking.
Regulate system parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings during the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technology makes sure:
Increased Performance: Lowered Electrical power losses for the duration of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Lifetime: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Remarkable option for optimizing solar energy technology and extending battery daily life. By next the above setup guidebook, people can ensure greatest performance and program longevity.