EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is usually a remarkably productive photo voltaic controller suitable for off-grid solar techniques. Dependant on multiphase synchronous rectification technologies, it assures optimized Vitality conversion and procedure balance for a wide array of photovoltaic (PV) apps.
Vital Capabilities in the EPEVER Tracer AN Sequence Controller
The Tracer AN collection utilizes EPEVER Solar Cost Controller technologies for excellent photo voltaic Power harvesting. Essential options incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Superior MPPT Algorithm with >99% performance.
Dual-Stage Charging for Increased battery existence.
Liquid crystal display Display screen with genuine-time information monitoring.
Several Load Command Modes such as handbook and timer.
Thorough Digital Protections from overcharging, about-discharging, small circuits, and reverse polarity.
Step-by-Stage Tutorial to Setting Up the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Make sure all parts are involved: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model quantity and voltage ratings match your photo voltaic panel and battery specifications.
2. Mounting the Charge Controller
Select a nicely-ventilated, dry place close to the battery lender.
Secure the Tracer AN controller using the offered mounting brackets.
Sustain correct clearance for heat dissipation.
three. Wiring the Photo voltaic Demand Controller
Warning: Generally abide by suitable protection protocols and make sure the system is run off ahead of connecting factors.
Action one: Link the battery terminals towards the demand controller (constructive to constructive, adverse to destructive).
Move two: Link the photo voltaic panel array to your PV enter terminals.
Phase 3: Hook up the load terminals if employing a direct load connection.
Move four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Settings
Power over the controller by connecting the battery Click Here initial.
Utilize the Liquid crystal display display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Handbook, timer, mild Manage.
five. Monitoring and Facts Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Data may be logged via the RS485 conversation port utilizing software which include Photo voltaic Station Computer.
Distant checking is feasible With all the EPEVER WiFi module.
six. Troubleshooting Frequent Challenges
Concern one: No Energy Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Verify the photo voltaic array’s voltage ranking.
Adjust technique parameters if vital.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Advantages of the Tracer AN Collection with MSR Technology
The multiphase synchronous rectification engineering makes certain:
Higher Efficiency: Diminished energy losses for the duration of conversion.
Increased Reliability: Stable effectiveness less than variable loads.
For a longer time Battery Everyday living: Constant and accurate charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological know-how is definitely an Excellent choice for optimizing solar power generation and extending battery daily life. By pursuing the above mentioned set up guideline, users can ensure optimum efficiency and method longevity.